Quantification of lidocaine and High-Throughput Screening of Cocaine, Adulterants, and Diluents in Drugs by Capillary Electrophoresis (CAT#: STEM-ET-0097-ZJF)

Introduction

Cocaine is one of the most frequently used illicit drug in the world. The chemical composition of cocaine samples varies according to the geographical region of the seizure, the production process (impurities), and the addition of adulterants and/or diluents. The concentration of cocaine in seized street samples may vary from 16 to 91% (w/w), in either hydrochloride salt and/or in the freebase form. The addition of diluents has been extensively reported and some of the common substances include carbohydrates (mannitol, lactose or glucose), boric acid, starch and sodium bicarbonate. Phenacetin, levamisole, lidocaine and caffeine are the most frequently found adulterants in seizures. Therefore, the development of simple and fast methods for the detection of cocaine and common adulterants, diluents and impurities are extremely important in forensic investigations. This service provides a method based on capillary electrophoresis with capacitively coupled contactless conductivity detection (CE-C4D) for the rapid (2.5 min) and simultaneous quantification of cocaine, levamisole, lidocaine, carbonate, borate, chloride, nitrate, nitrite and sulphate.

Add to Cart Please Inquire

Principle Applications Procedure Materials Notes Related Products

Principle

Capillary Electrophoresis (CE) is physical method of analysis which performs in a separation channel of elastic quartz capillary, under the influence of a high voltage direct current field. Charged analytes dissolved in an electrolyte solution are separated based on differences in mobility and/or distribution behavior of components. The migration velocity of an analyte under an electric field is determined by the electrophoretic mobility of the analyte and the electro-osmotic mobility of the buffer inside the capillary. The electrophoretic mobility of a solute depends on the characteristics of the solute (electric charge, molecular size and shape) and those of the buffer in which the migration takes place (type and ionic strength of the electrolyte, pH, viscosity and additives). Capillary electrophoresis provides greater resolution, higher sensitivity and online detection. It enables single-cell analysis and even single-molecule analysis, optimizing separation and analysis of biological macromolecules.

Applications

Biomedical, clinical, pharmaceutical, forensic, industrial, and food analysis

Procedure

1. Preparation: Preheat the capillary electrophoresis apparatus and flush the capillary with no voltage applied. Prepare mixed standard samples and buffer solution.
2. Sample Application: Put the appropriate amount of mixed standard samples in the sample tube at the corresponding position at the inlet of the capillary electrophoresis apparatus, and put the appropriate amount of buffer in the sample tube at the corresponding position of the apparatus.
3. Electrophoresis: Switch on the electrophoresis apparatus and set the voltage and program. Initiate automatic sampling, electrophoresis, and analysis.
4. Determination: Record and analyze the migration of each component. Capillary electrophoresis apparatus can be connected with various detectors to detect the separation. The most widely used is the UV-visible spectrophotometric detector. After the experiment, flush the capillary again.

Materials

• Capillary electrophoresis apparatus
• Sample solution
• Buffer solution

Notes

1. When an electric field is applied through the capillary filled with buffer, a flow of solvent is generated inside the capillary, called electro-osmotic flow (EOF). The reproducibility of CE separation will be seriously affected by small changes in EOF. For some applications, it is important to control EOF by modifying the inner wall of the capillary or by changing the concentration, composition and/or pH of the buffer solution.
2. The definition and automation of the injection process are critical for precise quantitative analysis. Modes of injection include gravity, pressure or vacuum injection and electrokinetic injection.
3. The employed electrolytic solution should be filtered to remove particles and degassed to avoid bubble formation that could interfere with the detection system or interrupt the electrical contact in the capillary during the separation run.
4. A rigorous rinsing procedure should be developed to achieve reproducible migration times of the solutes.

Other recommended products

Quantitative Determination of Caffeine in Pharmaceutical Dosage Forms by Capillary Electrophoresis (CAT#: STEM-ET-0172-ZJF)
Determination of Nitroimidazole Antibiotics Based On Dispersive Solid-Phase Extraction Combined with Capillary Electrophoresis (CAT#: STEM-ET-0130-ZJF)
Determination of Gallic Acid by Pressure-Assisted Capillary Electrophoresis (CAT#: STEM-ET-0232-ZJF)
Study of the Profile of Biologically Active Substances of Fruits of Sea Buckther of Different Varieties by Capillary Electrophoresis (CAT#: STEM-ET-0253-ZJF)
Determination of Colorants (Brilliant Blue FCF) in Milk Beverages by Capillary Electrophoresis (CAT#: STEM-ET-0267-ZJF)
Determination of 2-chlorophenol (2-CP) in Water Samples by Field-Amplified Sample Injection Combined with Capillary Electrophoresis (CAT#: STEM-ET-0197-ZJF)
Microsatellite Marker Analysis by Capillary Electrophoresis (CAT#: STEM-ET-0091-ZJF)
Analysis of Small Ions and Molecules in Amniotic Fluid by Capillary Electrophoresis (CAT#: STEM-ET-0220-ZJF)