Thermal conductivity measurement of fluids using the 3ω method (CAT#: STEM-PPA-0036-WXH)

Introduction

Thermal conductivity refers to how easily heat transfers between molecules. High thermal conductivity translates to high heat transfer, meaning the fluid will heat or cool quicker than one with low thermal conductivity.

Add to Cart Please Inquire

Principle Applications Procedure Materials Notes Related Products

Principle

The process involves a metal heater applied to the sample that is heated periodically. The temperature oscillations thus produced are then measured. The thermal conductivity and thermal diffusivity of the sample can be determined from their frequency dependence.

Applications

Determining the thermal conductivities of bulk material (i.e. solid or liquid) and thin layers

Procedure

1. Sample preparation and mounting
2. Experimental condition setting
3. Experiment start: Turn on the 3ω signal generator and lock-in amplifier, and control the temperature controller to make the sample temperature reach the set value. When the sample reaches a stable state, data acquisition and processing begin.
4. Data processing

Other recommended products

Thermal Conductivity Measurements of diamond thin films by 3ω-method (CAT#: STEM-PPA-0043-WXH)
Thermal Conductivity Measurements of TiO2 Thin Films by 3ω-method (CAT#: STEM-PPA-0038-WXH)
Thermal Conductivity Measurements of Fiber-based thermoelectric materials by 3ω-method (CAT#: STEM-PPA-0040-WXH)
3ω-method (CAT#: STEM-PPA-0033-WXH)
Thermal Conductivity Measurements of Carbon Nanowalls by 3ω-method (CAT#: STEM-PPA-0049-WXH)
Thermal Conductivity Measurements of AlN thin films by 3ω-method (CAT#: STEM-PPA-0041-WXH)
Thermal Conductivity Measurements of silicon dioxide thin films by 3ω-method (CAT#: STEM-PPA-0034-WXH)
Thermal Conductivity Measurements of deuterium by 3ω-method (CAT#: STEM-PPA-0050-WXH)