Long Scanning AFM Probes, HQ:NSC16/Hard/Al BS, 190 kHz (45 N/m), MikroMasch (CAT#: STEM-M-0076-LKN)

Cat Number: STEM-M-0076-LKN

Application: The 16 series cantilevers with high spring constant and low resonance frequency (below 250 kHz) can be used in tapping mode in SPM systems that have a low-frequency feedback loop. These cantilevers also fit SPMs that do not support probes with short lever arms.

Model: HQ:NSC16/Hard/Al BS

Add to Cart

Description Specification Features Related Products

Description

MikroMasch Long Scanning AFM Probes are designed for routine AFM measurements of robust samples, especially when the scan size is larger than 2 µm. The probes have a special wear-resistant coating that increases their lifetime.

Specification

Typical radius of uncoated tip: 8 nm
Resulting tip radius with the coating: < 20 nm
Full tip cone angle: 40°
Total tip height: 12 - 18 µm
Probe material: n-type silicon
Tip coating: Hard Diamond-Like-Carbon
Detector coating: Aluminum

Related Products

Conductive AFM Probes, HQ:NSC16/Cr-Au, 190 kHz (45 N/m), MikroMasch (CAT#: STEM-M-0077-LKN)
High Resolution AFM Probes, HI'RES-C14/CR-AU, 160 kHz (5 N/m), MikroMasch (CAT#: STEM-M-0078-LKN)

Other recommended products

General Purpose AFM Probes, HQ:NSC19/Al BS, 65 kHz (0.5 N/m), MikroMasch (CAT#: STEM-M-0086-LKN)
Test Structures TGXYZ02 (100 nm Step Height XYZ Calibration Grating), MikroMasch (CAT#: STEM-M-0148-LKN)
Conductive AFM Probes, HQ:NSC19/Cr-Au, 65 kHz (0.5 N/m), MikroMasch (CAT#: STEM-M-0088-LKN)
Conductive AFM Probes, HQ:NSC15/Cr-Au, 325 kHz (40 N/m), MikroMasch (CAT#: STEM-M-0072-LKN)
Conductive AFM Probes, HQ:CSC17/Cr-Au, 13 kHz (0.18 N/m), MikroMasch (CAT#: STEM-M-0101-LKN)
Tipless AFM Probes, HQ:CSC37/tipless/Cr-Au, 20 - 40 kHz (0.3 - 0.8 N/m), MikroMasch (CAT#: STEM-M-0130-LKN)
General Purpose AFM Probes, HQ:NSC18/Al BS, 75 kHz (2.8 N/m), MikroMasch (CAT#: STEM-M-0090-LKN)
Test Structures TGF11 (Grating with Trapezoidal Structures), MikroMasch (CAT#: STEM-M-0154-LKN)