Inquiry Basket

Conductive AFM Probes, HQ:NSC18/Cr-Au, 75 kHz (2.8 N/m), MikroMasch (CAT#: STEM-M-0094-LKN)

Cat Number: STEM-M-0094-LKN

Application: Cantilevers of the 18 series are optimal for Lift mode operation AFM as they provide high stability in tapping mode as well as high sensitivity to magnetic and electric forces that may be weak. These cantilevers are also used for mapping of materials properties in force modulation mode and true topography imaging of the soft samples.

Model: HQ:NSC18/Cr-Au

Add to Cart

Description Specification Related Products

Description

MikroMasch Conductive AFM Probes are ideal for imaging of electric properties of materials in ambient conditions. Though silicon is conducting in bulk due to the presence of the dopants, the surface of the probe is always coated by a thin (1 - 2 nm) native oxide film. That is why using the conductivity of Si probes for AFM measurements is only possible in UHV conditions after the film is removed.

Specification

Typical radius of uncoated tip: 8 nm
Resulting tip radius with the coating: < 35 nm
Full tip cone angle: 40°
Total tip height: 12 - 18 µm
Probe material: n-type silicon
Tip coating: Gold
Detector coating: Gold

Related Products

Conductive AFM Probes, HQ:NSC18/Pt, 75 kHz (2.8 N/m), MikroMasch (CAT#: STEM-M-0095-LKN)
Magnetic AFM Probes, HQ:NSC18/Co-Cr/Al BS, 75 kHz (2.8 N/m), MikroMasch (CAT#: STEM-M-0096-LKN)

Other recommended products

General Purpose AFM Probes, HQ:NSC36/Cr-Au BS, 65 - 130 kHz (0.6 - 2 N/m), MikroMasch (CAT#: STEM-M-0116-LKN)
High Resolution AFM Probes, HI'RES-C15/CR-AU, 325 kHz (40 N/m), MikroMasch (CAT#: STEM-M-0067-LKN)
Test Structures TGXYZ02 (100 nm Step Height XYZ Calibration Grating), MikroMasch (CAT#: STEM-M-0148-LKN)
Highly Ordered Pyrolytic Graphite ZYH (HOPG, 3.5° Mosaic Spread), 10 x 10 x 1 mm, 1 chip, MikroMasch (CAT#: STEM-M-0160-LKN)
Test Structures TGX/NM (Grating with Undercut-Edge Structures), MikroMasch (CAT#: STEM-M-0153-LKN)
General Purpose AFM Probes, HQ:NSC15/Al BS, 325 kHz (40 N/m), MikroMasch (CAT#: STEM-M-0068-LKN)
Magnetic AFM Probes, HQ:NSC18/Co-Cr/Al BS, 75 kHz (2.8 N/m), MikroMasch (CAT#: STEM-M-0096-LKN)
Conductive AFM Probes, HQ:NSC35/Pt, 150 - 300 kHz (5.4 - 16 N/m), MikroMasch (CAT#: STEM-M-0110-LKN)

We use cookies to understand how you use our site and to improve the overall user experience. This includes personalizing content and advertising. Read our Privacy Policy

Accept Cookies